Home > Bosch Security > Fire Alarm Systems > Conventional Devices > Detectors, Bases, & Housings >

Bosch D273THE Four-Wire Smoke Detector with a 135F Heat Sensor, EOL Relay
D273THE Bosch Security | JMAC Supply
 

Our Price: $59.25

Product Code: BOSCH-D273THE
Qty:

Description Product Resources
 

Bosch D273THE Four-Wire Smoke Detector with a 135F Heat Sensor, EOL Relay


  • Also known as: DS-D273THE, BOS-D273THE

    • The Bosch D273THE four-wire photoelectric smoke detector uses an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and to reduce dust accumulation and nuisance alarms.

    During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the D273THE signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.

    The D273THE is equipped with a 135F (57C) heat sensor and an EOL relay.

    These detector models measure light within a chamber using an infrared (IR) LED light source and a silicon photodiode. The chamber is covered with a fine screen to deter insects, reduce dust accumulation, and prevent nuisance alarms. Smoke particles reflect light onto the photodiode during a fire. When photodiode measurements exceed the alarm threshold, the detector triggers an alarm. After the alarm condition has been resolved, power must be cut at the control panel in order to reset the detector.    		Features:
    • Four wire smoke detector with a 135°F (57°C) heat detector and an EOL relay
    • 12 VDC or 24 VDC input
    • Designed for commercial or residential use
    • Four-wire application
    • Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
    • Removable terminal block to simplify wiring connections
    • Cable connection point for voltmeter sensitivity test
    • Trim Plate TP280 for retrofit and remodeling purposes


    Technical Specifications:
    • Dimensions (Diameter x H): 5 in. x 2 in. (12.7 cm x 5.1 cm)
    • Material: High impact, fire retardant ABS plastic
    • Power-up Time: 22 sec maximum
    • RMS Ripple: 25% of DC input maximum
    • Voltage (stand-by): 10 VDC to 30 VDC
    • Current Draw at 30 VDC: 36 mA maximum (alarm), 15 mA (standby)


    UPC: 782695023228

    Average rating: 4.5, based on 2 reviews


    For more information about the Bosch Security D273THE, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Bosch Security > Fire Alarm Systems > Conventional Devices > Detectors, Bases, & Housings
    Bosch Security
    Bosch Security > Fire Alarm Systems
    Bosch Security > Fire Alarm Systems > Conventional Devices