Knowledge Base:  
You are here: Knowledge Base > NP7-12

What kind of terminals does the NP7-12 Yuasa Battery have?


Last Updated: 11/21/2013
By

The NP7-12 is equipped with F1 terminals.


The red and black labeled tabs at the top of the battery are 0.187 inches (3/16") wide. A terminal of that width is referred to as an F1 terminal. F2 terminals are 0.25 inches (1/4") wide. The F1 terminals on the NP7-12 are only compatible with same-sized F1 spade connectors at the end of your device's wire leads. However, users have the option of using terminal/connector adapters to make an F1 battery terminal compatible with an F2 connector, or vise versa.


Similar Products:
Yuasa NP4-12 SLA Battery


Was this article helpful?

Comments:
 

Related Articles
 >

What does the difference in Ah levels mean between the Yuasa NP7-12 and the NP4-12?


 >

Should my Yuasa NP7-12 battery be installed in the upright position?


 >

What should I do if my Yuasa NP7-12 SLA battery appears to be swelling?