Knowledge Base:  
You are here: Knowledge Base > LYNX L5100

How do I program a hardwired zone on my LYNX Touch L5100?


Last Updated: 11/20/2013
By

The LYNX Touch L5100 is designed to operate as a wireless control panel, hence its ability to support up to 63 wireless zones. However, it does also support one hardwired zone with 200 ohms of maximum wire resistance to which a hardwired device or device loop can be connected. For the LYNX Touch, HWZ1 and GND terminals should be wired to the hardwired device. Zone 1 is the programmed zone for a hardwired device.


Similar Products:
L5000
LYNX Plus L3000


Was this article helpful?

Comments:
 

Related Articles
 >

Can I use WIFI as a primary communicator on the LYNX L5100, and a GSM cellular communicator as a backup?


 >

Where is the best place to install the LYNX 5100?


 >

How do I make my L5100 panel compatible with Z-Wave?


 >

Does LYNX Touch 5100 use Z-Wave Motion Detectors?


 >

Why does it take the 5811 door sensor thirty seconds to set off an alarm on the L5100?


 >

What's the difference between a Rule and a Scene on the LYNX 5100?


 >

How do I hook up power to the L5100 Control Panel?


 >

What security cameras are compatible with the L5100 Touch?


 >

Can wired contacts be used with my LYNX Touch?


 >

Does the Honeywell LYNX L5100 have to be connected to a telephone line?


 >

Can the Lynx Touch L5100 work without Total Connect?


 >

How do I wire a Lynx Touch L5100 trigger?


 >

What deadbolt lock should I use with the LYNX Touch L5100?


 >

How does the Tuxedo Touch controller compare to the LYNX Touch L5100?


 >

How do I program a duress code on my Honeywell Lynx Touch L5100?


 >

Is the LYNX Touch compatible with any Vista Series Control Panel?


 >

How do I install the L5100 myself?


 >

Does the L5100 need to have an internet connection?


 >

How do I change the audio and visual display settings on my LYNX Touch L5100?


 >

What wireless routers will work with my L5100?


 >

Can you turn off an alarm siren on the L5100?


 >

How long is the Honeywell LT-Cable for the LYNX L5100?


 >

How does the LYNX Touch L5100 compare to the L5000?


 >

What can the GSMVLP5-4G do for the LYNX Touch L5100?


 >

How loud is a LYNX L5100 siren?


 >

How do I register the L5100 sim card with my GSMVLP5-4G Cellular Communicator?


 >

What happens if I lose internet connection on my L5100?


 >

Can the L5100 LYNX Touch support dual-path monitoring?


 >

How many zones does an L5100 have?


 >

How do I get the LYNX Touch L5100 to work with Total Connect?


 >

How do I change my L5100 installer code?


 >

How do I connect my smartphone or tablet to the LYNX Touch L5100?


 >

How do I enable chime mode on the L5100 control panel?


 >

How do I program the correct time and date into my L5100 Control Panel?


 >

Will the Honeywell 5818MNL work with the Honeywell Lynx Touch L5100?


 >

How can I access my Honeywell Lynx L5100 remotely?


 >

How do I program a Honeywell 5877 to my Lynx Touch alarm panel?