Von Duprin QEL9947EO 3 US28 Exit Only Quiet Electric Latch Retraction Concealed Vertical Rod Exit Device 3' Door, Panic Bar Exit Only, Less Trim, Satin Aluminum Clear Anodized
Also known as: QEL9947EO3US28
Von Duprin QEL9947EO 3 US28 Grade 1 Concealed Vertical Rod Exit Bar, Wide Stile Pushpad, 36" Device, 80" to 100" Door Height, Exit Only, Motorized Latch Retraction, Less Dogging, Satin Aluminum Clear Anodized Finish, Field Reversible
It is currently possible to purchase the Von Duprin QEL9947EO 3 US28 Aluminum Finish Three Foot Quiet Electric Latch Retraction Concealed Vertical Rod Panic Bar Exit Only.
For all metal single doors and double doors, Von Duprin offers vertical rod exit mechanisms in the 98 and 99 series. They are positioned within doors to provide an exit during emergencies when the door will open by pushing against the bar. While the 9927 series has a grooved mechanism case, the 9827 series panic bars have a smooth mechanism case.
Concealed vertical rod panic bars latch into the top and bottom of the door frame using rods inserted inside the door's frame. They can now be used on double doors without a mullion thanks to this. This non-handed vertical rod device can be mounted on doors that swing either left or right because it is non-handed. These components are Grade 1 door hardware and meet the requirements of ANSI A156.32014.
Through a switch, the Quiet Electric Latch Retraction function enables bolt retraction. By doing this, the exit door it is mounted on becomes a push-pull entry door.
There is no trim hardware for the exterior of the door included with the exit-only function panic bar. If used, it would prevent reentry and only permit exit through the door. Trim needs to be bought separately.
This hardware cannot be used on a fire door since it is not fire rated.
The aluminum finish is available for this Von Duprin series quiet electric latch retraction panic bar. |
Features:
- Hex key dogging feature standard
- Device centerline from finished floor: 39-5/8" (1006 mm) standard and adjustable from 35-5/8" (905mm) to 49-5/8" (1260mm)
- Anodized Aluminum Finish
- ANSI Function: 01
- Cylinders and sex bolts are not included
- Quiet electric latch retraction - Bolt retraction via switch
- Device lengths: 3 feet (914mm) i.e 3' device for 2' 4" - 3' door (711mm to 914 mm) door size
- Fasteners: Includes screw pack for 1-3/4" (44mm) and 2-1/4" (57mm) thick metal doors
- Non-handed operation provides greater flexibility
- Mechanism case dimensions: 2-1/4" x 2-1/4" (57mm x 57mm)
- All 9947 series exit devices are UL listed for panic hardware and are certified to ANSI A156.3, 2008 Grade1
- Latch Bolt: Deadlocking top and bottom bolt, 5/8" (16mm) throw
- Strike: Top - 338 unfinished and Bottom - 385A unfinished strikes included as always
|
