 |
 |
 |
|
Takex PXB-100ATC Photoelectric Beam Sensor
Also known as: PXB100ATC, PU-PXB100ATC
TAKEX PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical. The PXB-100ATC uses a unique synchronized timing system to achieve unrivalled detection performance and versatility. |
Features:
- Independent control of upper and lower beams
- Choose between Synchro Quad and Anti-Crawl operation
- Separate outputs for crawl attempt and full beam break
- 20 degree vertical / 90 degree horizontal adjustment
- Vivid colour coded internal casings for easy visual alignment
- Integrated sound check tone generator and monitor output
- Advanced synchronization - stack more TAKEX sensors than ever before
- IP65 housing
|
Technical Specifications:
- Detection system: Near infrared beam interruption system (4 beams simultaneous interruption or upper/lower 2 beams interruption)
- Infrared beam: Double modulation pulsed beam by infrared LED
- Protection distance: Outdoor 100m (330ft) or less, Indoor 200m (660ft) or less
- Max Beam Range: Outdoor 1000m (3300ft) or less, Indoor 1000m (3300ft) or less
- Response time: OR gated : upper 2 beams and lower 2 beams simultaneous interruption 0.05sec., upper 2 beams interruption or lower 2 beams interruption : 0.1/0.2/0.3/0.5 sec. (selectable), AND gated : upper 2 beams and lower 2 beams simultaneous interruption 0.05sec.
- Supply voltage: 12V to 30VDC (Non-polarity)
- Current consumption: Transmitter : 27mA / Receiver : 48mA
- Alarm output: Dry contact output : N/C or N/O selectable, Contact action : Interruption time (min. 2 sec), Capacity : AC/DV30V 1A (resistive load) Protective resistor
- Environmental output: Dry contact output : N/C or N/O selectable, Action : activated when weather condition worsens, Capacity : AC/DC30V 1A (resistive load) Protective resistor
- Tamper output: Dry contact output : N/C, Action : activated when cover is detached, Capacity : AC/DC30V 0.1A (resistive load) Protective resistor
- Alarm LED: Red LED (Receiver), ON : when an alarm is initiated
- Attenuation LED: Red LED (Receiver), ON : when beam is attenuated
- Functions: Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Programmed AGC, Synchro timing selection, Auto-gain lock function, Monitor jack, Tamper, Response time adjustment,Alarm output selection, Environment output selection, Upper / Lower beam switch, Wireless Alignmnet Checker connecting function
- Beam Adjustment: Horizontal : 90 / Vertical : 20
- Ambient temperature range: -35C to +66C (-31F to +151F)
- Mounting positions: Indoor, Outdoor
- Wiring: Terminals
- Weight: Transmitter : 1.4kg (49oz), Receiver : 1.47kg (51.5oz)
- Appearance: PC resin (wine red)
- Accessory: Pole attachment, Anti-bird spike, Screws, Instruction manual
|
For more information about the Takex PXB-100ATC, please contact us.
|
|
|
 |
|
 |
|
