Home > System Sensor > Audible/Visible Notification > Strobes >

System Sensor SWK Strobe, White, Wall Mount, FIRE Lettering, Standard Candela
SWK System Sensor | JMAC Supply
 
In Stock
Our Price: $89.79



Product Code: SYSTEM-SENSOR-SWK
Qty:

Description Product Resources
 

System Sensor SWK Strobe, White, Wall Mount, FIRE Lettering, Standard Candela


  • Also known as: BK-SWK

  • White, outdoor strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd. Outdoor back box included




    The System Sensor SpectrAlert Advance SWK is a white, outdoor strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd. Outdoor back box included. The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT amber lens strobes provide the distinctive visual signal used for mass notification during non-fire evacuations. The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT strobes are designed with an amber colored lens mounted in a white housing to allow visual signaling for mass notification in compliance with ANSI/UL1638 - Standard for General Signaling Visible Appliances. The SW-ALERT and SWH-ALERT amber lens strobes provide simple installation and instant compatibility with SpectrAlert Advance synchronized systems. Their features include plug-in design and 11 field selectable candela settings. These strobes are indoor products that attach to universal mounting plates connected to a four-inch square, four-inch octagon, singlegang, or double-gang junction boxes. The circuit is wired to the SEMS terminals on the mounting plate. The device will rotate into position, locking the product's pins into the mounting plate's terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw.
    Features:
    • Weatherproof per NEMA 4X, IP56
    • Listed to UL 1638 (strobe) and UL 464 (horn)
    • Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
    • Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115,
    • Rotary switch for horn tone and three volume selections
    • Horn rated at 88+ dBA at 16 volts
    • Rated from 40F to 151F
    • Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
    • Plug-in design with minimal intrusion into the back box
    • Tamper-resistant construction
    • Listed for ceiling or wall mounting


    Technical Specifications:

    • Operating Temperature: 40F to 151F (40C to 66C)
    • Strobe Flash Rate: 1 flash per second
    • Nominal Voltage: Regulated 12 DC/FWR or regulated 24 DC/FWR1
    • Operating Voltage Range: 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
    • Input Terminal Wire Gauge: 12 to 18 AWG
    • Wall-Mount Dimensions (including lens): 5.6 L 4.7 W 2.5 D (142 mm L 119 mm W 64 mm D)
    • Horn Dimensions: 5.6 L 4.7 W 1.3 D (142 mm L 119 mm W 33 mm D)
    • Wall-Mount Weatherproof Back Box Dimensions (SA-WBB): 5.7 L 5.1 W 2.0 D (145 mm L 130 mm W 51 mm D)
    • Color: White


    UPC: 783863036712

    Average rating: 5.0, based on 2 reviews


    For more information about the System Sensor SWK, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    System Sensor > Audible/Visible Notification > Strobes
    System Sensor
    System Sensor > Audible/Visible Notification
    Fire & Life Safety > Notification & Signaling > Strobes
    System Sensor > Audible/Visible Notification > AV Outdoor Applications
    Fire & Life Safety > Notification & Signaling