Home > System Sensor > Audible/Visible Notification > Strobes >

System Sensor SWH Strobe, White, Wall Mount, FIRE Lettering, Standard Candela
SWH System Sensor | JMAC Supply
 

Our Price: $68.56



Product Code: SYSTEM-SENSOR-SWH
Discontinued, Call For Replacement

Description Product Resources
 

System Sensor SWH Strobe, White, Wall Mount, FIRE Lettering, Standard Candela


  • Also known as: BK-SWH

  • The System Sensor SpectrAlert Advance SWH is a white strobe with selectable high-candela strobe settings of 135, 150, 177 and 185 cd.

    The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT amber lens strobes provide the distinctive visual signal used for mass notification during non-fire evacuations.

    The System Sensor SpectrAlert Advance SW-ALERT and SWH-ALERT strobes are designed with an amber colored lens mounted in a white housing to allow visual signaling for mass notification in compliance with ANSI/UL1638 - Standard for General Signaling Visible Appliances.

    The SW-ALERT and SWH-ALERT amber lens strobes provide simple installation and instant compatibility with SpectrAlert Advance synchronized systems. Their features include plug-in design and 11 field selectable candela settings.

    These strobes are indoor products that attach to universal mounting plates connected to a four-inch square, four-inch octagon, singlegang, or double-gang junction boxes. The circuit is wired to the SEMS terminals on the mounting plate. The device will rotate into position, locking the product's pins into the mounting plate's terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw.
    Features:
    • Plug-in design with minimal intrusion into the back box
    • Tamper-resistant construction
    • Field-selectable candela settings on wall units: 135, 150, 177, and 185
    • Horn rated at 88+ dBA at 16 volts
    • Rotary switch for horn tone and three volume selections
    • Universal mounting plate for wall units
    • Mounting plate shorting spring checks wiring continuity before device installation
    • Electrically Compatible with legacy SpectrAlert devices
    • Compatible with MDL3 sync module
    • Listed for ceiling or wall mounting


    Technical Specifications:

    • Standard Operating Temperature: 32F to 120F (0C to 49C)
    • Humidity Range: 10 to 93% non-condensing
    • Strobe Flash Rate: 1 flash per second
    • Nominal Voltage Regulated: 12 DC/FWR or regulated 24 DC/FWR1
    • Operating Voltage Range: 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
    • Input Terminal Wire Gauge: 12 to 18 AWG
    • Wall-Mount Dimensions (including lens): 5.6 L 4.7 W 2.5 D (142 mm L 119 mm W 64 mm D)
    • Horn Dimensions: 5.6 L 4.7 W 1.3 D (142 mm L 119 mm W 33 mm D)
    • Color: White


    UPC: 783863028120

    Average rating: 5.0, based on 2 reviews


    For more information about the System Sensor SWH, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    System Sensor > Audible/Visible Notification > Strobes
    System Sensor
    System Sensor > Audible/Visible Notification
    Fire & Life Safety > Notification & Signaling > Strobes
    Fire & Life Safety > Notification & Signaling