Silent Knight 5496 Intelligent Distributed Power Module

• UL Listed for 6 amps of notification power
• Power supplys advanced switch mode design reduces damaging heat and manages power up to 50% more efficiently than other systems
• Built-in synchronization for appliances from AMSECO, Gentex, Faraday, System Sensor, and Wheelock
• 24 VDC filtered output voltage
• Four power-limited notification outputs; 2 Class A or 4 Class B, or 1 Class A and 2 Class B
• NACs are programmable as Notification Appliance Circuits, or as auxiliary power to be used as constant, resettable, or door holder power
• 3 amps per output circuit
• Ground fault detector
• Communicates to the FACP via 4-wire SBUS (wire runs up to 6000 ft)
• AC loss delay option shuts off power to non-essential high-current accessories like magnetic door holders
• Lightweight design adds to ease of installation and reduces shipping costs
• UL 864,1481 & 1971 listed
• ANSI Cadence pattern output capability built-in

• AC Input: 120 VAC at 2.7 A
• Output: 24 VDC at 6 amps
• Current: Standby 40 mA, Alarm 160 mA
• Notification/Aux.Power circuits: 4
• Output configuration: 2 Class A (Style Z), 4 Class B (Style Y) (1 Class A & 2 Class B)
• Amps per output circuit: 3.0 (6.0 amps total)
• Notification circuit output: 20.4 to 27.3 VDC, 3.0 amps each, 4.7k EOL resistor required on each Class B circuit
• Battery charging capacity: 35.0 AH
• Dimensions: 12.25 W x 16 H x3 D (30.88 Wx 40.64 H x7.62 D cm)