You are here: Home > Securitron > Power Supplies > Power Over Ethernet (POE) > AQE Single Port Injector
We found 2 results matching your criteria.
Sort By:
1
AQE15 Securitron | JMAC Supply Securitron AQE15 Power Over Ethernet Injector, 1.4A 24VAC/VDC

Securitron AQE15 PoE Single Port MidSpan Injector, 1.4A, Dual Voltage

Our Price: $91.81
AQE30 Securitron | JMAC Supply Securitron AQE30 Power Over Ethernet Injector, 2.6A 24VAC/VDC

Securitron AQE30 PoE Single Port MidSpan Injector, 2.6A, Dual Voltage

Our Price: $134.40
   
 
1

With the AQE Single Port Midspan Injector you can have the flexibility of Power over Ethernet (PoE) without needing to replace your non-PoE network switches. The AQE injector merges power with data by working between your network and any PoE capable access control or security devices. The devices gain both network access and power through the injector. Your security cameras, door controllers, and other equipment will no longer be tied down to electrical outlets! They can be installed right where they need to be.

The AQE lets you instantly assess the status of the unit with a green on-board LED. This light should be on during normal operation, so if it's off there's either no power to the unit, or no connection on the PoE or data port. There are multiple flash patterns to indicate when the signature resistance is too low, too high, or when there is a port overload fault. It also has a reset feature, in case you need to shut down the PoE. The PCBs are made of fiberglass to better protect the environment.

The AQE injector is low voltage, and works with 24 VAC or 24 VDC input, plus or minus 15%. The input current is either 1.4 or 2.6 Amps. The output is 50 VDC, with either 300 or 600mA of current. The shutdown terminals run from 5 to 24 VDC, with a 10mA maximum. The AQE is 10/100/1000 data rate Base-T compliant, and the maximum data cable length is 100 meters or 328 feet. The injector operates between -32 to 120 degrees Fahrenheit, or 0 to 49 degrees Celsius.

The AQE15 has 1.4 Amps of input, with 24 VAC or VDC input voltage. Its output current is 300mA and its data rate is 10/100. The AQE30 has 2.6 input Amps with 24 VAC or VDC input voltage. Its output current is 600mA and its data rate is 10/100/1000. The storage temperature should be between -20 and 70 degrees Celsius. They are 4.2" long by 2.5" wide and 1.2" deep. The AQE15 weights about 0.25 lbs, and the AQE30 weighs 0.30 lbs.

If there is ever an issue with the product, it is protected by the MagnaCare lifetime replacement, no fault warranty.

The AQE injector's listings include:

  • UL294BListed
  • UL/CUL60950-1
  • 15WIEEE802.3af
  • 30WIEEE802.3at
  • CSAC22.2No.205-M1983, Signal Equipment
  • RoHS compliant