Secura Key ET8-SR-X-M e*Tag Smart Reader, Black, Mullion Mount
Also known as: ST-ET8SRXM
The e*Tag Smart Readers are available in either mullion mount (ET8-SR-X-M) or switchplate (ET8-SR-X-D) form factors.
The e*Tag Smart Reader adds Contactless Smart Card capability to the SK-NET System using the NOVA.16 Controller.
e*Tag Smart Readers work with Secura Key e*Tag encoded 13.56 MHz contactless smart cards and key tags, encoded in 26 or 32-bit formats.
e*Tag cards use enhanced DES encryption, which makes them virtually impossible to counterfeit. e*Tag credentials have memory ranging from 2K to 10K bits, and they meet the ISO 15693 international standard. The ET8-SR reader connects to the NOVA.16 Controller via the RS-485 peripheral bus, which supports up to 16 readers.
The ET8-SR obtains data communications and 12VDC power from the NOVA.16, but it has all the inputs and outputs required to monitor and control a door or gate. The reader sends card data and input status changes to the Controller, and receives access granted, access denied, and output control commands from the Controller. All door connections (Strike/ Latch, REX, Door Monitor, aux inputs and outputs) are made locally at the Smart Reader. Cable Home Runs from the door location back to the NOVA.16 Controller are not required.
NOVA.16s RS-485 Peripheral Bus may extend up to 4000 cable feet from the control panel. ET8-SRs may be connected to the NOVA.16 in daisy-chain, multi-drop, or loop configurations, providing great flexibility in system architecture.
The ET8-SR-X-D is a switchplate-sized reader which fits a standard J-box. It is designed for indoor applications only. It includes a convenient wiring harness, which allows the reader to be plugged in when the installation is completed.
The ET8-SR-X-M is a mullion-sized reader which fits a standard door frame. It is epoxy-potted for outdoor installations. It includes a convenient wiring harness, which allows the reader to be plugged in when the installation is completed. Both models have a solid-state relay, plus four inputs and two open collector logic outputs.
Both models are UL 294 listed and FCC/CE approved. The optional SK-SR1 SecuRelay intelligent relay module is recommended for Smart Readers installed in high-risk areas. It prevents an intruder from gaining entry by hot-wiring the strike contacts at the reader. |
Features:
- Reads Secura Key e*Tag Contactless Smart Cards
- Mullion housing allows indoor/outdoor door frame Mounting
- Four Inputs to Monitor Contact Closures
- Two open collector outputs to control external devices
- Solid State Relay to control door strike or other devices
- LED (Red/Green) and buzzer
- Connect up to 16 units to each NOVA.16 controller on RS-485 Peripheral Bus
- Optional SecuRelay for high-risk installations
|
