Protech Technologies SDI-76M-HS1 Indoor Motion Sensor, High Security, 75' x 75', Fluorescent Filter Module

• Fluorescent Filter Module: FF-3 Fluorescent Filter is a plug-in printed circuit board module that can be field installed on the sensor in applications where nearby fluorescent lighting is affecting sensor performance. The FF-3 Fluorescent Filter is highly recommended in applications where fluorescent lighting will be left on during the protected hours and the lighting fixtures are located in the sensors field of view (within 20 ft.). And Gate/Or Gate Switchable: Two position switch enables the installer to field adjust whether both technologies must activate simultaneously to initiate a sensor alarm (And Gate) or whether either technology activating will initiate a sensor alarm (Or Gate).
• Anti-Masking: Special circuitry that detects an obstruction of the sensors faceplate and causes the alarm relay to change state.
• Remote Self-Test: Enables the sensor to be tested from a remote location in the same manner as if physically walk-tested.
• Remote RF Power Shut-Off: Enables the microwave radiation to be shut-off from a remote location.
• Tamper-Proof Mounting: The heavy-duty swivel-mounting bracket is locked in position from inside a tampered mounting base.
• Conduit Equipped Wiring Entry: A universal conduit wiring entry fitting provides tamper-proof and environmental protection for the wiring.
• Stereo Doppler Microwave Sensor: Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
• Dual Element Infrared Sensor: Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
• Microprocessor Controlled: Proprietary integrated circuit design provides enhanced digital signal processing for bith microwave and passive infrared technologies.
• Digital Range Control: Ten-position digital switch adjusts how far the commercial motion sensors detects (to its maximum range).
• Digital Sensitivity Control: Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
• Balanced Temperature Compensation: Stereo Doppler Microwave and Passive Infrared automatically adjust detection parameters to compensate for losses in range that occur at elevated teperatures.
• Assorted Protection Patterns: Interchangeable Fresnel Lens Modules offer a tremendous assortment of protection patterns for optimum flexibility.
• Stereo Doppler Supervision: A component failure will cause the sensor to lock-in alarm.
• Master LED: Displayed on the face of the unit indicating the alarm relay status.
• Analytic LEDs: Alarm and environmental caution LEDs for both Stereo Doppler Microwave and Passive Infrared portions are displayed on the face of the sensor. An internal switch can disable both Master and Analytic LEDs.
• All Solid State Relay: User selectable form C relay output.
• Metal Housing: Rugged and durable and offers maximum protection against RFI and EMI interference.
• Swivel Mounting: Multi-directional.

• Input Voltage: 8.5 to 20 VDC
• Current Consumption: 150 mA @ 12 VDC (LEDs off)
• RF Power Density: 120 uW/cm2 max at the face of the unit
• Operating Temperature: -30F to 130F -34C to 54C
• Operating Humidity: 0 to 100% Relative Humidity.
• Relay contact Rating: 0.1A,50 V
• Housing Dimensions: 6 1/2 L x 5 1/4 W x 3 3/8 H 16.5cm L x 13.3cm W x 8.5cm H
• Microwave Frequency: 10,525 MHz USA, 10,587 MHz International, 9,900 MHz International, 9,470 MHz International