Home > Norton Door Controls >

Norton Door Controls 5730-689
5730-689 Norton Door Controls | JMAC Supply
 
In Stock
Our Price: $2,563.00



Product Code: NORTON-DOOR-CONTROLS-5730-689
Qty:

Description Product Resources
 

Norton Door Controls 5730-689


  • Also known as: 5730689, Y9-5730689

    • 5700 Series Low Energy Operator

    The 5700 Series design is based on ease and simplicity. This unit installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton's 1601 closer body. Quiet and dependable, the 5700 meets the requirements of the Americans with Disability Act (A.D.A.) and ANSI/BHMA A156.4. Available push- or pull- side mounting, this unit is perfect for applications that don't require special features but demands reliability.

    5730-689 - STOP (PUSH) SIDE OF DOOR, Aluminum finish.    		Features:
    • Double Lever Arm
    • Minimum reveal: 2-5/8" (67)
    • Maximum reveal: 6-3/4" (171)
    • Ease of installation and setup
    • Simple instructions
    • Application versatility and ease of adjustment; push or pull side mounting units available
    • Operates as mechanical surface closer during close cycles, when door is opened manually or if power is turned off; quiet operation
    • Spring force provides the feel of a normal manual door closer; door can be opened manually if desired
    • Norton 1601/1601BF series door closer
    • Non-Handed
    • Unit Activation Options: wall switches, motion sensor, radio frequency device
    • End-User On/Off Switch
    • Hold Open options; 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
    • Obstruction Detection: motor stops if door is obstructed during an opening; door closes under manual spring force (not to exceed 15lbf)
    • "Push and Close"; allows the operator to skip the hold open time when it is not necessary or required
    • Adjustable door sensitivity
    • Overload Safety Shut-Off - after two minutes of receiving a door activation signal, the inverter will time out and close the door; prevents motor/inverter damage
    • Motor Start Delay for Locking Hardware - 0-5 second delay to allow locking hardware to release first
    • Onboard power supply for accessories: 24VDC (1.1A)


    UPC: 049306083638

    For more information about the Norton Door Controls 5730-689, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Norton Door Controls