Home > Napco >

Napco PIR1680 Microprocessor PIR Sensor, 20lb Pet Immunity, Room-Temp Alert
PIR1680 Napco | JMAC Supply
 
Our Price: $32.42



Product Code: NAPCO-PIR1680
Qty:

Description
 

Napco PIR1680 Microprocessor PIR Sensor, 20lb Pet Immunity, Room-Temp Alert


Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify NAPCO sensor technologys innovation, increasing dependability without compromising intruder catch sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45 (13.7m) range. Or, the original model PIR1680, has a 50 (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signaturesenabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also feature a built-in temperature sensor at no additional chargeso you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or dcor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.		Features:
  • 50 x 50 range
  • 20 lb pet/animal Immunity
  • Room-temp alert temperature monitoring provides auto-alert at 40*F - 90* F
  • Look-down/creep zone
  • D.C.I.D. Technology - detect & compare imaging diagnostics for advanced false and true alarm detection
  • Active self test mode
  • Exceptional RFI-/EMI/lightning shielding of key components
  • Lens bank available, including long range, barrier, and specialty ranges
  • Wall or corner mountable
  • Tamper supervised
  • Form A relay


Technical Specifications:
  • Microprocessor: 2K ROM with A-D Converter
  • Operating temperature: -10 to +50 degrees C (14o to 122o F)
  • Freeze damage alert: 40oF (4oC)
  • Heat damage alert: 90oF (32oC)
  • Mounting: Wall or corner, 12 (3.6m) max.; For pet/animal applications 7 (2.1m) is recommended.
  • Output relay: Form A; normally closed
  • Relay time: Approx. 3 seconds
  • Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
  • Multi-mode Trouble Output (Open collector)
  • Self-Test Interval: 11 - 16 hrs.
  • Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel.
  • Current drain: 28mA (idle/alarm) at 12VDC (nominal)
  • Dimensions: 3.3H x 2.5W x 1.9D (8.4 x 6.4 x 4.8 cm) (HxWxD)
  • Shipping weight: 5 oz (142 gm)


Average rating: 5.0, based on 1 review


For more information about the Napco PIR1680, please contact us.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Napco