 |
 |
 |
|
Napco GEM-P3200 Hybrid Security Panel Control Panel/Communicator
Napco's Gemini GEM-P3200 is a state-of-the-art microcomputer-based burglary and residential fire alarm control panel of modular design. Integrally an 8-zone panel, it will support up to 32 zones with optional zone expansion modules, wireless receiver modules and/or GEM-RP1CA/RP1CAe/RP1CAe2 Keypads. Each panel includes an integral digital communicator.
The control panel features programmable area partitioning. That is, the system may be divided into up to two discrete multiple-zone areas, each allowing access by only those users programmed for their respective area. |
Features:
- 8 End-of-line-resistor burglary zones programmable
- for area, exit/entry delay, interior, follower, day zone, chime, fire options, sensor watch, swinger shutdown, zone anding and a variety of other features
- Up to 48 points of up to 32 zones with optional zone-expansion modules 4- zone keypad EZMs (built-in)
- Including up to 2 2-wire fire zones
- Up to 32 individually coded users, each with a programmable authority level
- 3 on-board relay outputs, expandable 24 external relay outputs
- 3 keypad panics: fire, police & auxiliary
- 2 independent area partitions
- Up to 7 separate access stations by up to 32 users
- Up to 24 separately-addressable X-10 devices with the GEM-X10KIT
- English-language prompts & system status messages from choice of keypad (8) models
- User-customized zone descriptions, reprogrammable as required
- 2-wire and 4-wire smoke detectors
- Reports alarms, restores and troubles by zone
- 255 event schedule
- 800 event log
- Overview mode permits monitoring and control of total system from one keypad
- 2 programmable entry delay times
- Interior-bypass group
- Dynamic battery test interrupts charging and places battery under load every four hours
- Chime by zone; programmable duration
- Non-volatile RAM retains memory during power losses
- Quickloader programmable
- Auto-Download Log
- Exclusive V.A.L.I.D. feature (Verifying Automatic Line Integrity Diagnostic) reduces false alarms due to changes in line resistance
|
Technical Specifications:
- Operating temperature: 0-49C (32-120F)
- Input power: 16.5Vac via Class 2 Plug-In 40VA transformer
- Loop voltage: 10-13Vdc
- Loop current:2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones
- Loop resistance: 300W max.; 50W for 2-wire smoke detector zones
- Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A, 0: 6 PF
- Auxiliary power output: 12Vdc regulated
- Remote power output: 12Vdc regulated (for keypads)
- 650 mA combined standby current (remote power + aux. power + reset relay power)
- Standby time: residential fire/burglary & commercial burglary, 4 hours min.
- EZM module: GEM-EZM8: Input, 50mA (including PGM output. PGM output: 5mA, 12V special application)
- Keypad current: GEM-RP1CAe2: 100mA; 35mA if backlighting is disabled (cut W1, W2 & W3) PGM Output: 5mA, 12V special application
- Maximum number of keypads: 7. Maximum wiring length for each run (#22AWG): 1000 divided by total number of keypads & EZMs on run
- Designer keypad dimensions: 4 3/8 x 5 7/8 x 1 1/6 (HWD); 11.1cm x 14.9cm x 2.7cm (HWD)
|
Average rating: 5.0, based on
1 review
For more information about the Napco GEMP3200, please contact us.
|
|
|
 |
|
 |
|
