Home > Honeywell Access Control > Controllers & Modules > PRO3200 > PRO3200 Controllers >

Honeywell Access PRO32R2 Dual Reader Module
PRO32R2 Honeywell Access | JMAC Supply
 
Super Sale! Limited Time Only
In Stock
Our Price: $489.00

Product Code: HONEYWELL-ACCESS-PRO32R2
Qty:

Description Product Resources
 

Honeywell Access PRO32R2 Dual Reader Module

The PRO3200 professional series family of access control modules is designed for high density installations. Supporting up to 16 readers per enclosure and 32 readers per intelligent controller along with up to 100,000 card capacity provides a combination of small installation footprint and superior cost per door ratio.

The PRO32R2 provides I/O support for two card access reader. The unit interfaces with the intelligent control module (PRO32IC). In the event that communication to the intelligent control module is lost, the card access readers can be individually configured to allow entrance based on security needs. This customization allows for a door to be configured as locked, unlocked, or access only via valid facility code.
Features:
  • Dual reader module
  • Provides I/O support for 2 card access readers
  • Designed for the PRO3200 series


Technical Specifications:

  • Port: 2 reader ports - 12 VDC at 50 mA, clock / data or data0 / data1
  • Keypad: Keypad multiplexed with card data
  • Wire Support: Two-wire or one-wire bi-color LED support
  • Buzzer Support: Buzzer support only with one-wire LED control
  • Alarm Inputs: 8 supervised, general purpose alarm inputs with programmable circuit type (only 6 supervised inputs available when using PRO22ENC1, PRO22ENC2 and PRO22ENC5 enclosures)
  • Alarm Inputs: 2 dedicated alarm inputs for tamper detection and power loss
  • Output Relays: 2 general purpose output relay, form C, 5 A 28 VDC, 4 general purpose output relay, form C, 2 A 28 VDC (only 2 output relays available when using PRO22ENC1, PRO22ENC2 and PRO22ENC5 enclosures)
  • Mounting: None
  • Inputs: Inputs may be assigned to door related functions or general purpose I/O
  • Circuit Type: Circuit type - normally open, normally closed, non-supervised, supervised (with standard 1K or custom end-of-line resistance 200-10K)
  • Line Conditioning: Line conditioning - programmable sensitivity and hold time
  • Outputs: Outputs may be assigned to door related functions or general purpose I/O
  • Relay Rating: The 5 A relay(s) are rated to handle the inductive loads of door locking devices
  • Configurable: Configurable as standard (energize to activate) or fail-safe (de-energize to activate)
  • Pulse Time: 1-32,400 seconds, 1-255 for door relays
  • RS485 Port: RS485 port, 4,000 ft (1,250m) total bus length
  • Standard Speed: 38.4 Kbps

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Honeywell Access Control > Controllers & Modules > PRO3200 > PRO3200 Controllers
Honeywell Access Control
Honeywell Access Control > Controllers & Modules > PRO3200