GRI 130T-12-W 3/4" Switch & 3/8" Magnet Recessed Switch Set, White, Standard Gap 1/2"+, Open Loop, M-5 MagnetUPC: 069762502374
Also known as: 130T12W, GI-130T12W
The 130T requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.
Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1-1/2" thick door or window. This will allow you to offset the magnet should it be required.
The 130T switch set was developed for and should only be used in openings with wooden or aluminum frames.
- Color: White
- Standard Gap 1/2"+
- Open Loop
- M-5 Magnet
- Lifetime Warranty
- Wire leads
- Longer Leads, Zip Cords, or Jacketed Cable on Request
- Built-in Resistors and Diodes Available on Request
- Switches or Magnets are Available Separately
- Supervisory Loops Available