Home > Fire-Lite Alarms > Annunciators >

Fire-Lite LED-10 Remote LED-Type Fire Annunciator with Ten Alarm (Red) and Trouble (Yellow) LEDs
LED-10 Fire-Lite | JMAC Supply
 

Our Price: $486.00



Product Code: FIRE-LITE-LED-10
Discontinued, Call For Replacement

Description Product Resources
 

Fire-Lite LED-10 Remote LED-Type Fire Annunciator with Ten Alarm (Red) and Trouble (Yellow) LEDs


  • Also known as: LED10, FL-LED10

  • The Fire-Lite LED-10 Series Annunciators consist of the LED-10, LED-10L and LED- 10LS2. They are compact, attractive LED-type fire annunciators designed for use with the MS-5210UD Fire Alarm Control Communicator. The LED-10L and LED-10LS2 are models which do not have function switches or a key-switch. The LED-10LS2 is intended primarily for Canadian installations since it provides zone 9 and 10 alarm LEDs that are yellow for supervisory functions.

    The LED-10 Series Annunciators are capable of displaying independent zone fire alarm, process monitor alarm, trouble and supervisory status. They also provide system status LEDs to display Power, Alarm, Trouble, Supervisory and Signals Silenced conditions. The LED-10 model is also capable of performing system acknowledge, silence, drill and reset remotely.

    Communication between the control panel and the LED-10 Series Annunciators is accomplished over a two-wire serial interface employing the EIA-485 communication standard. Up to 32 LED-10 Series Annunciators may be connected to the two-wire EIA- 485 circuit. The annunciators may be powered from the host FACP or remote, UL listed, filtered, regulated power supplies.
    Features:
    • Zone Alarm and Trouble LEDs.
    • System Status LEDs for Power (green), Alarm (red), Trouble (yellow), Supervisory (yellow) and Signals Silenced (yellow).
    • Local piezo sounder with alarm and trouble resound.
    • Distinctly different flash rates for LEDs and piezo sounder distinguish system status: fire alarm = 1 second on and 1 second off; process monitor alarm = 1/4 second on and 1/4 second off; supervisory alarm = 1/2 second on and 1/2 second off
    • EIA-485 connects to control panel terminal port (requires LED-10IM module).
    • Plug-in terminal blocks for ease of installation and service.
    • DIP switch controls transmit/receive mode.
    • Up to 32 LED-10 Series Annunciators per MS-5210UD.
    • Mounting options: Surface mount in three gang electrical box P/N: SBB-3; Semi-flush mount in three-gang electrical box P/N: 10103 (2 3/16" min. depth); Can be located up to 6,000 feet (1,800 m) from the panel using 18 AWG wire
    • Slide-in labels for custom labeling.
    • Simple programming at MS-5210UD panel enables communications to LED-10 Series annunciators.
    • Function switches for: Acknowledge; Signal Silence; Drill; System Reset
    • Enable/Disable key-switch for function switches.
    • DIP switches control local functions such as piezo enable/disable, function switches and key-switch enable/disable.


    UPC: 783008102548

    Average rating: 5.0, based on 2 reviews


    For more information about the Fire-Lite LED-10, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Fire-Lite Alarms > Annunciators
    Fire-Lite Alarms