Home > Batteries > Sealed Lead Acid Batteries >

EnerSys NP3-6 6 Volt 3 Ah SLA GENESIS NP Battery
NP3-6 EnerSys | JMAC Supply
 

Our Price: $27.50


Product Code: ENERSYS-NP3-6
Qty:

Description Product Resources
 

EnerSys NP3-6 6 Volt 3 Ah SLA GENESIS NP Battery

Also known as: NP36

The EnerSys NP3-6 is a 6 Volt, 3 Ah, Rechargeable, Non-Spillable, Sealed Lead-Acid Battery with F1 (0.187") lead connectors.

Sealed Construction
The Enersys NP3-6 is uniquely constructed and sealed to prevent electrolyte leakage from case or terminals.

Electrolyte Suspension System
The battery utilizes a state-of-the-art electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.

Control of Gas Generation
The design of the EnerSys NP3-6 battery incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.

Low Maintenance Operation
Due to a perfectly sealed construction and the recombination of gases within the cell, the battery is virtually maintenance free.

Operation in any Orientation
The combination of sealed construction and Enersys' unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.

Valve Regulated Design
The batteries are built with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.

Lead Calcium Grids
The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications.

Long Cycle Service Life
Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.

Float Service Life
The expected service life is five years in float standby applications.

Separators
The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.

All batteries purchased from JMAC Supply are individually tested prior to shipment to ensure optimal performance and maximum battery life. If you have any questions or need any assistance in selecting the correct battery for your application please feel free to contact us at (516) 812-0917 and a member of our team will be happy to assist you.
Features:
  • 6 Volt, 3.0 Ah Sealed Lead Acid Battery
  • F1 Fast-On Lead Connectors
  • Long service life (can last over 1,000 charge/discharge cycles)
  • Low maintenance
  • Non-spillable
  • Leak proof construction
  • Rechargeable
  • Capable of recovering from deep discharge
  • Electrolyte Suspension System


Technical Specifications:

  • Nominal Capacity 20hr: 3.0
  • Voltage: 6
  • Dimensions: Length 5.28" (134mm) x Width 1.30" (33mm) x Height 2.64" (67mm)
  • Weight: 0.69 Kg (1.53 lbs)
  • Terminal: A
  • Layout: 1

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  6 of 6 people found the following review helpful:
 
5 of 5 Review left on 7/6/2013
Reviewer: Tod Stanton from Mather, WI  
Purchased the EnerSys NP3-6

Was this review helpful to you?

  9 of 9 people found the following review helpful:
 
5 of 5 Review left on 5/7/2013
Reviewer: Raymonde Shepherd from Four Corners, MT  
Purchased the EnerSys NP3-6

Was this review helpful to you?


Browse for more products in the same category as this item:

Batteries > Sealed Lead Acid Batteries
Batteries