EnerSys NP12-12T 12 V 12 Ah GENESIS NP Battery w/ F2 TerminalsAlso known as: NP1212T
EnerSys NP12-12T is a 12 Volt 12 Ah Rechargeable, Non-Spillable, SLA Sealed Lead-Acid Battery. The NP12-12T features F2 .250 inch Terminals for connecting to compatible devices and is an ideal battery for back up battery power for alarm panels, uninterrupted power supplies or lights, or as a primary power source for any device that requires a 12 Volt 12 Amp Hour Sealed Lead Acid Battery with F2 Connector Terminals.
Enersys' unique construction and sealing technique ensures no electrolyte leakage from case or terminals.
Electrolyte Suspension System
All NP batteries utilize EnerSys's unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.
Control of Gas Generation
The design of EnerSys's NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.
Low Maintenance Operation
Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.
NP batteries are manufactured using a range of terminals which vary in size and type.
Operation in any Orientation
The combination of sealed construction and Enersys' unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage.
Valve Regulated Design
The batteries are equipped with a simple, safe, low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge.
Lead Calcium Grids
The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge.
Long Cycle Service Life
Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.
Float Service Life
The expected service life is five years in float standby applications.
The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.
- 12 Volt, 12 Ah Sealed Lead Acid Battery
- Electrolyte Suspension System
- Recovers from a deep discharge
- Maintenance Free