Bogen WMT1AS

Also known as: BO-WMT1AS, BOG-WMT1AS

The Bogen WMT1AS is a balanced and isolated impedance matching transformer with additional features that allow adapting of signal levels between various audio source and input types. Typical uses are to provide a 600-ohm balanced input adapter for unbalanced AUX inputs. WMT1AS can also be used to drive long, balanced, twisted pair cable. This improves noise rejection and the maximum run length. The WMT1AS can adapt speaker level signals (25V/70V systems) to a level suitable for the AUX input of an amplifier, adapt line-level signals down to levels suitable for MIC inputs and can adapt speaker level signals to MIC level as well.

Features:

Hi-Z, 10k-ohm primary impedance
Lo-Z, 600-ohm secondary impedance, balanced with center tap
Matches high-to-low impedance or low-to-high impedance
Adapts line-level signals to microphone inputs
RCA connector for Hi-Z side
Screw terminals for Lo-Z side
Small steel enclosure with mounting ears allows easy mounting
No wiring or soldering required
May be used to provide a 600-ohm output from a Bogen mixer/pre-amplifier
Can adapt speaker-level signals to the AUX input level of an amplifier

Technical Specifications:

Product Type: Impedance Matching Transformer
Weight (Approximate) (g): 113.398
Input Receptacle Type: RCA
Depth: 1.3"
Depth (mm): 31.75
Height: 2.4"
Height (mm): 60.198
Weight (Approximate): 4 oz
Width: 2"
Compatibility: Bogen Amplifier
Output Receptacle Type: Terminal Block
Width (mm): 50.8
Limited Warranty: 2 Year

UPC: 765368481891

For more information about the Bogen WMT1AS, please contact us.

WMT1AS Data Sheet

User Manual

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Bogen